{"product_id":"oneballjay-magne-traction-edge-tool","title":"One Mfg Magne-Traction Edge Tool","description":"\u003cp\u003eFor tuning up your Magne-Traction board. This small tool fits into the grooves so you can get yours on. Sharp edges rip!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003e2 Angles:\u003c\/strong\u003e 90 \u0026amp; 88 Degrees.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eTuning Instructions:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e1. Place board or skis in a vise to secure and clean base with a fresh hot wax job and scrape or use One Mfg base cleaner.\u003cbr data-mce-fragment=\"1\"\u003e2. Check the side and base edges for burrs. Rub a ceramic, diamond or gummy stone over the area to remove burrs in preparation for edge shaping.\u003cbr data-mce-fragment=\"1\"\u003e3. Use the One Mfg edge tool to sharpen side edges. Start from the tip and pull smoothly with firm pressure to the tail. Do this in smooth passes until the edges are sharp. Repeat on the other side. Remember to flip the file around so that the teeth face the proper direction...look for the arrow.\u003cbr data-mce-fragment=\"1\"\u003e4. If you like your board or skis to be catch free in the tip and tail then de-tune using a de-burring stone to round the edges on the tip and tail. Start on the edges as they curve up into the tail and nose and file down approximately 1.5\" past the edge contact point as your base lays flat.\u003cbr data-mce-fragment=\"1\"\u003e5. For really sharp edges, take a fine diamond stone or polishing stone and go over the edge again using the same technique.\u003cbr data-mce-fragment=\"1\"\u003e6. If you like to jib rails and boxes, don't sharpen your edges much to keep them catch free!\u003cbr\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003ePRO TIP:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eWhen you place the edger on your edge. The number of degrees on the tool which is below the file is the number of the bevel the guild is delivering to your edge.\u003c\/p\u003e","brand":"One Mfg","offers":[{"title":"Default Title","offer_id":39944159756368,"sku":"210000126885","price":15.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0238\/9304\/9424\/products\/Oneballjay-Magne-Traction-Edge-Tool.jpg?v=1668617892","url":"https:\/\/www.sourceboards.com\/en-us\/products\/oneballjay-magne-traction-edge-tool","provider":"The Source Snowboard \u0026 Skate","version":"1.0","type":"link"}