Burton 2020 Process

Lightweight true twin performance tuned to the versatile style of pros like Mark McMorris.

ADDITIONAL INFO:

• FSC™ Certified Super Fly II™ 700G Core: Stronger and lighter woods target specific areas of the core to provide pop, strength, and reduced weight.
• Dualzone™ EGD™: Engineered wood grains for more edge-hold, response, and strength.
• Squeezebox: Profiled core for easier board control, more energy, and pop.
• Triax™ Fiberglass: Versatile flex and response for everything from mini to mega shred.
• The Channel®: Stronger, faster, easier, and designed to help dial-in the perfect stance for you.
• Frostbite Edges: Introduced by Burton long before all the hype about wavy “serrated knife” edges, Frostbite extends out slightly beneath your bindings for tremendous edge-hold on hard, icy conditions. Powerful when you need them, playful when you don’t, Frostbite Edges are hungry for hard-pack while remaining smooth, flowing, and forgiving.
• Scoop: This exaggerated tip and tail scooping turns up the edges for a looser, more forgiving feel that adds catch-free fun when riding everything from a knee-high box to neck-deep pow.
• Pro-Tip™: A tapered tip and tail thickness reduces swing weight for easier mobility.
• Infinite Ride™: Your board will maintain its flex, pop, and feel from the first day forward, season after season.

CAMBER PROFILE:

MULTI CAMBER

Like the name suggests, hybrid profiles are a mix of camber, flat and rocker. There are heaps of different combinations of this employed by snowboard manufacturers. The rocker in the tip and tail are great for turn initiation and float in powder_ whilst the camber underfoot adds stability, pop and increased edge-hold. You get the edge-hold you need from the camber section underfoot and the float in powder from the rocker sections.

Burton call the Pure-Pop Camber shape the “Diet Camber” featuring about 70% of the camber profile length that a typical camber board has. The camber zone ends just outside each channel, and a flat zone continues for a few centimeters of length until the board transitions into a small amount of early rise near the nose and tail.  This board bend lies somewhere between the playful flat bend and the precise camber bend. It also offers increased pop as the flat zones before the nose and tail kicks provide additional load and rebound.

SHAPE:

TRUE TWIN

A true twin shape is completely symmetrical. If you cut a true twin in half exactly down the middle, you would end up with two identical pieces of board.

This means that the nose and the tail are the same length and the same width and the bindings are centred on the board – i.e. they are equal distances from the centre of the board and the front binding is the same distance from the nose as the back binding is from the tail.

Of course, as you can adjust the width of the position of the bindings you could create a setback stance if you were so inclined but this would be unusual on a true twin given its purpose and might be a strange feel depending on the camber profile (i.e. one foot could end up being over camber and the other over rocker which would probably feel odd).

In addition to this a true twin has exactly the same flex in the nose and tail.

FLEX:

MEDIUM

2-5 (1-10 Scale)

BASE:

SINTERED

BURTON WARRANTY

THREE-YEAR WARRANTY

Burton will repair or replace any current season channel board purchased after 08/13/13 for 3 years from the original purchase date of the original owner (with proof of purchase) against manufacturer's defects. All warranty claims should be accompanied by an explanation and receipt.