







Burton 2020 Youth Chopper
SKU: 210000051606
You Save: $96.00 (40%)
Hurry up! Sales Ends In
Hurry! Only 0 Left in Stock!
The Burton Chopper® is the ticket for boys who want to start snowboarding and quickly learn the basics. What makes it so perfect is the beginner-friendly combo of a convex base with upturned edges and the softest flex possible so that even the lightest weight riders can master turning and stopping. The catch-free feeling continues with a flat profile from nose to tail that’s extra stable for better balance and board control. Attach the Riglet accessory to the nose or tail of the 80-120cm sizes to tow him around and get him comfortable until he's ready to add bindings.
ADDITIONAL INFO:
- FSC™ Certified Fly® Core
- Biax™ Fiberglass
- Super Sap Epoxy: A resin formulated with bio-based materials that reduces the carbon footprint by 50% over conventional all-petroleum-based epoxies. Less oil consumption means even less of a carbon footprint per board, which is good in our book.
- Easy Bevel: Easy Bevel Edge Tune gives riders an incredibly soft and forgiving board that’s virtually impossible to catch an edge on. With a convex base that lifts the edges off the snow and a super soft flex, these boards make it easy to learn balance and board control.
CAMBER PROFILE:
FLAT
Just like it sounds this profile has no camber or rocker – it’s flat between the contact points.
Burtons Flat Top camber profile runs perfectly flat for the running length of the board, with a few millimeters of early rise rocker in the tip and tail. This shape is the perfect blend of the stability and precision camber offers, as well as the catch-free and playful personality of rocker. With no camber to press out of the board, turning takes very little energy to initiate. Flat boards perform well in all conditions, from powder conditions to hard-packed and groomers. It is great board shape for any rider.
SHAPE:
TRUE TWIN
A true twin shape is completely symmetrical. If you cut a true twin in half exactly down the middle you would end up with two identical pieces of board.
This means that the nose and the tail are the same length and the same width and the bindings are centred on the board – i.e. they are equal distances from the centre of the board and the front binding is the same distance from the nose as the back binding is from the tail.
Of course, as you can adjust the width of the position of the bindings you could create a setback stance if you were so inclined but this would be unusual on a true twin given its purpose and might be a strange feel depending on the camber profile (i.e. one foot could end up being over camber and the other over rocker which would probably feel odd).
In addition to this a true twin has exactly the same flex in the nose and tail.
FLEX:
BUTTERY
0-5 (1-10 Scale)
BASE:
EXTRUDED
BURTON WARRANTY
ONE-YEAR WARRANTY
Burton will repair or replace any current season non-channel boards purchased after 08/13/13 for 1 year from the original purchase date of the original owner (with proof of purchase) against manufacturer's defects. All warranty claims should be accompanied by an explanation and receipt.
Camber Profile | Terrain | Width | Shape | Flex | Base |
---|---|---|---|---|---|
Flat | All Mountain | Regular | Twin | Buttery | Extruded |
Size of Board | Weight Range | Waist | Nose / Tail | Sidecut |
---|---|---|---|---|
80cm | 25-50lbs | 17.8 | 19.4 / 19.4 | 2.9 |
90cm | 25-50lbs | 17.9 | 19.9 / 19.9 | 3.6 |
100cm | 40-55lbs | 18.8 | 21.2 / 21.2 | 4.2 |
110cm | 40-55lbs | 20.3 | 23.1 / 23.1 | 4.9 |
115cm | 50-80lbs | 21.3 | 24.3 / 24.3 | 5.2 |
120cm | 50-80lbs | 22.2 | 25.4 / 25.4 | 5.6 |
125cm | 70-100lbs | 23 | 26.3 / 26.3 | 6.0 |
130cm | 70-100lbs | 23.2 | 26.6 / 26.6 | 6.2 |