Hot
New
Pre-order
Out of Stock

Jones Men's Aviator 2.0 VDLR Ltd Snowboard 2023

SKU: 210000130928

$749.99

Hurry up! Sales Ends In

Hurry! Only 0 Left in Stock!

Location Stock
loading..
158
162
PRODUCT INFORMATION
RETURN POLICIES
PRODUCT INFORMATION

Limited edition Victor De Le Rue pro model Aviator 2.0 featuring a built-in stomp pad and graphics inspired by mountains in the French Pyrenees.

Victor De Le Rue's pro model Aviator 2.0 is a hard charging directional twin built for expert all-mountain riders who like to toss tricks and stomp airs anywhere on the mountain.

What sets Victor's pro model apart is a built-in stomp pad that offers unmatched traction for riding one-footed and landing tricks with a foot between the bindings. Beyond the stomp pad, this limited edition model features the same tech and construction as the standard Aviator 2.0 including a full camber profile, Koroyd dampening in the wood core, a 3D Contour Base 2.0, Triax Fiberglass, Sustainable Flax/Basalt stringers, an ECO-Plastic topsheet and Traction Tech 3.5 edges. The 3D Contour Base starts after the contact point and helps eliminate edge catch and improve turn fluidity while the Koroyd, Triax fiberglass and stringers suck up board chatter and offer supreme pop and lightning fast response. The bold graphic features mountains in the French Pyrenees, Victor's home range.

Profile: Camber
Terrain: Resort/Powder
Response: Responsive

Features:

  • 3D Base Contour 2.0: Moderate 3D Contour Base featuring an even balance of 4mm spoon bevel in the nose and 4mm spoon bevel in the tail. Spoon bevel starts at the rocker point.
  • Traction Tech 3.5: Traction Tech 3.5 features three bumps per edge (front binding, board center, back binding). The middle bump is slightly bigger than the outside bumps for better grip.
  • Progressive sidecut: At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.
  • Blunt nose: How a board glides in powder, crust, corn or any snow more than an inch deep, is dictated by it’s front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the ‘snow plow’ rounded tip and it’s extra swing weight. - Jeremy Jones
    Directional flex pattern: Off set tip-to-tail flex pattern that is designed for directional freeride boards. The nose, center of board and tail are slightly different stiffnesses to help lift the nose, sink the tail and improve stability at speed.
    V-core: Jones exclusive wood core profiling that offers a stable and playful board feel. The wood core is softer between the feet for easy turn initiation and stiffer in the nose and tail for stability riding through uneven terrain and landing airs.
  • Sintered 8000 Base: New super durable material made from Ultra High Molecular Weight Polyethylene (UHMW-PE) and carbon. Base is easily repairable, highly wax absorbent and wicked fast.
  • Triax fiberglass: Multi-axis, stitched fiberglass laminate that offers a precise and responsive ride in any terrain or snow conditions.
  • Koroyd Construction: Koroyd is the lightest, most advanced damping core material Jone's has ever tested. Koroyd absorbs vibrations and adds response at a fraction of the weight which enhances control and confidence.
  • Sustainable Flax/Basalt Power stringers: Sustainable stringer made with 100% natural fibers. Basalt stringers improve torsional response and transfer power from under your feet to the tips of the board to eliminate nose and tail chatter.
  • Eco-plastic topsheet: Bio-plastic topsheet made from Castor beans. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).
  • Power Core: Triple-density full wood core featuring hardwood bamboo stringers for added pop and durability plus paulownia for weight savings.
  • Bio Resin: Bio Resin is a bio-based epoxy made with 27% plant-based carbon instead of petroleum-based carbon. The organic raw materials used to make bio-resin are co-products or waste products of plant-based industrial processes. Bio-resin requires 33% less greenhouse gas emissions to produce than conventional epoxy.
  • Oversized recycled edges: All Jones boards are made with oversized recycled steel edges for added durability and improved production sustainability.
    Recycled ABS Sidewalls: ABS Plastic is one of the necessary evils of snowboard production. We improve the sustainability of our snowboards by using only recycled plastic.
  • Factory Tuned: All Jones Snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.
  • Forever Flex: Forever Flex is a new manufacturing process that helps stabilise the flex and rocker of a board for its lifetime.
  • Art by: Shaun Gordon

Profile: Directional Tapered

Directional tapered boards excel in a pure mountain environment. The tail sinks in pow for better float and quicker turns.

A directional shape with a longer, softer nose and a shorter, stiffer tail get taken to the next level with a tapering design—which sees a wider nose tapering into a narrower tail. The advantages are two-fold: this shape not only sees mega-enhanced floatation with a surfy feel in deep powder, it also creates a faster turning snowboard which is noticeably more nimble and great for tree riding.

Shape: True Camber

A traditional full camber profile that offers the insane edge response of camber without the usual hang-ups. The camber radius tapers into the beveled 3D Contour Base at the tips which releases the edges where they like to hook and balances the pop and directional stability of camber with a looser, less-catchy feel.

Flex: 8 (Scale 1 - 10)

Power. Precision. Control.

Base: Sintered

High-end base material that is harder, more durable, and faster than extruded bases.

RETURN POLICIES
If you are not satisfied with your full priced purchase, you may return the unused product complete with original packaging and tags intact instore or online within 30 days of receiving the item for a full refund or store credit. Please note that items marked Final Sale are not elegible for returns or exchanges.

For more information, please visit our Returns and Exchanges Page.
Pre-loader