Yes 2020 Basic

---

Developed as a go-to, ride-it-all deck, the Basic has been refined over the years to the point that both pros and newbies reach for it on a regular basis. The UnderBite outline extracts more arc, more hold and a better carving experience out of every design we apply it to and the Basic was the genesis of it all.

ADDITIONAL INFO:

• Core: Full Poplar
• Underbite Outline: Developed as a go-to, ride-it-all deck, the Basic has been refined over the years to the point that both pros and newbies reach for it on a regular basis. The UnderBite outline extracts more arc, more hold and a better carving experience out of every design we apply it to and the Basic was the genesis of it all.
• Biax Fiberglass
• Profile: CamRock 4-4-4
• Riders: RDM, Benji Ritchie
• NOTE: This board has a flip flop base

---

CAMBER PROFILE:

MULTI CAMBER

Like the name suggests, hybrid profiles are a mix of camber, flat and rocker. There are heaps of different combinations of this employed by snowboard manufacturers. The rocker in the tip and tail are great for turn initiation and float in powder, whilst the camber underfoot adds stability, pop and increased edge-hold. You get the edge-hold you need from the camber section underfoot and the float in powder from the rocker sections.

---

SHAPE:

TRUE TWIN

A true twin shape is completely symmetrical. If you cut a true twin in half exactly down the middle, you would end up with two identical pieces of board.
This means that the nose and the tail are the same length and the same width and the bindings are centred on the board – i.e. they are equal distances from the centre of the board and the front binding is the same distance from the nose as the back binding is from the tail.
Of course, as you can adjust the width of the position of the bindings you could create a setback stance if you were so inclined but this would be unusual on a true twin given its purpose and might be a strange feel depending on the camber profile (i.e. one foot could end up being over camber and the other over rocker which would probably feel odd).
In addition to this a true twin has exactly the same flex in the nose and tail.

---

FLEX:

MEDIUM

5 (1-10 Scale)

---

BASE:

EXTRUDED

---

WARRANTY:

YES. guarantees all snowboards to be free from defects in materials and craftsmanship for life.

YES. Snowboards warrants all snowboards sold by YES. to be free of defects in material or workmanship for as long as you, the original purchaser, own the product. If a product is found to be defective by YES in its sole discretion, YES.’s only responsibility shall be limited to repair or replacement of the defective product. YES. will not be responsible for any costs, losses or damages incurred as a result of loss or use of product.
All products returned to YES. for warranty inspection must receive prior return authorization which can be given over the phone or via e-mail. Ship products freight prepaid and insured. YES. assumes no responsibility for products during shipment from the customer to our Warranty Department. Shipping charges are not refundable.

https://yesnowboard.com/support/warranty

---

2020 Snowboard Summary Yes Basic

Camber Profile	Terrain	Width	Shape	Flex	Base
Multi Camber	All Mountain	Regular	True Twin	5 (1-10 Scale)	Sintered

2020 Yes Board Specs

Size of Board	Weight Range	Waist	Nose / Tail	Sidecut
152cm	130-170lbs	25.0	29.37 / 29.37	7.9 / 7.2 / 7.9
155cm	140-180lbs	25.1	29.54 / 29.54	8.1 / 7.4 / 8.1
158cm	150-190lbs	25.3	29.81 / 29.81	8.3 / 7.6 / 8.3
161cm	160-200lbs+	25.4	29.91 / 29.91	8.5 / 7.8 / 8.5